邓非;胡敏捷;胡玉雷;陈志;何江;

• 1:武汉大学测绘学院
• 2:中国船舶工业六〇四研究院

摘要(Abstract)：

针对传统的基于全站仪的船舱容量计量方法存在采样点密度不足、人为影响因素较大、自动化程度不高等缺点,该文提出了一种基于结构光和近景摄影测量技术的便携式船舱容量测量技术。首先利用结构光为船舱内壁提供纹理信息,然后基于近景摄影测量技术获取舱室表面点云,最后基于Nurbs曲面拟合船舱内壁三维模型并计算船舱容量。实验结果证明,该技术具有可行性和可靠性,能满足高精度舱容计量需求。

关键词(KeyWords)： 船舱容量;结构光;近景摄影测量;点云;Nurbs曲面

Abstract:

Keywords:

基金项目(Foundation): 国家自然科学基金项目(41371425,41271431)

作者(Author): 邓非;胡敏捷;胡玉雷;陈志;何江;

Email:

DOI: 10.16251/j.cnki.1009-2307.2017.08.027

参考文献(References)：

• [1]ZHANG Z.Flexible camera calibration by viewing a plane from unknown orientations[C]//IEEE International Conference on Computer Vision.Washington,DC,USA:IEEE Computer Society,1999:666-673.
• [2]李欣菊.摄像机标定算法研究[D].北京:中国科学院自动化研究所,2003.(LI Xinju.Research on camera calibration algorithm[D].Beijing:Institute of Automation,Chinese Academy of Sciences,2003.)
• [3]朱华统,杨元喜,吕志平.GPS坐标系统的变换[M].北京:测绘出版社,1994.(ZHU Huatong,YANG Yuanxi,LV Zhiping.Transformation of GPS coordinate system[M].Beijing:Surveying and Mapping Press,1994.)
• [4]曾文宪,陶本藻.三维坐标转换的非线性模型[J].武汉大学学报(自然科学版),2003,28(5):566-568.(ZENG Wenxian,TAO Benzao.Non-linear adjustment model of three-dimensional coordinate transformation[J].Geomatics and Information Science of Wuhan University,2003,28(5):566-568.)
• [5]ECK M,HOPPE H.Automatic reconstruction of Bspline surfaces of arbitrary topological type[C]//SIGGRAPH'96Proceedings of the 23rd Annual Conference on Computer Graphics and Interactive Techniques.New York,USA:ACM,1996:325-333.
• [6]KRISHNAMURTHY V.Fitting smooth surfaces to dense polygon meshes[C]//SIGGRAPH'96Proceedings of the 23rd Annual Conference on Computer Graphics and Interactive Techniques.New York,USA:ACM,1996:313-324.
• [7]朱东波,张舜德,李涤尘,等.密集散乱测量数据点的B样条曲面拟合研究[J].计算机辅助几何设计与图形学报,2001,13(12):1123-1128.(ZHU Dongbo,ZHANG Shunde,LI Dichen,et al.B-spline surface approximation for scan measured cloudy data[J].Journal of Computer-aided Design&Computer Graphics,2001,13(12):1123-1128.)
• [8]张丽艳.逆向工程中模型重建关键技术研究[D].南京:南京航空航天大学,2001.(ZHANG Liyan.Research on key technology of model reconstruction in reverse engineering[D].Nanjing:Nanjing University of Aeronautics and Astronautics,2001.)
• [9]刘胜兰.逆向工程中自由曲面与规则曲面重建关键技术研究[D].南京:南京航空航天大学,2005.(LIU Shenglan.Research on key technology in reconstruction of free-form®ular surfaces in reverse engineering[D].Nanjing:Nanjing University of Aeronautics and Astronautics,2005.)
• [10]MA Weiyin,KRUTH J P.NURBS curve and surface fitting for reverse engineering[J].International Journal of Advanced Manufacturing Technology,1998,13(12):918-927.
• [11]胡敏捷,张毅,孙庆文.船舶舱室点云模型重构技术研究[J].船舶设计通讯,2010(4):66-68.(HU Minjie,ZHANG Yi,SUN Qingwen.The research of 3Dlaser scanning point model reconstruction[J].Journal of Ship Design,2010(4):66-68.)
• [12]VERSPRILLE K J.Computer-aided design applications of the rational B-spline approximation form[D].Syracuse:Syracuse University,1987.
• [13]沈俊华,史贵振.自由曲线曲面造型理论发展综述[J].信息技术,2013(3):184-188.(SHEN Junhua,SHI Guizhen.Review on the free curves and surfaces modeling theories[J].Information Technology,2013(3):184-188.)
• [14]熊英,胡于进,赵建军.基于映射法和Delaunay方法的曲面三角网格划分算法[J].计算机辅助设计与图形学学报,2002,14(1):56-60.(XIONG Ying,HU Yujin,ZHAO Jianjun.An algorithm of surface triangulation based on mapping and Delaunay method[J].Journal of Computer-Aided Design&Computer Graphics,2002,14(1):56-60.)
• [15]吴立军.断面法土石方测量与计算的自动化[J].地理空间信息,2005,3(5):58-62.(WU Lijun.Automation of earthwork volume computation by ross-section[J].Geospatial Information,2005,3(5):58-62.)