王罗刚;王同合;范百兴;程志强;崔瑞兵;

• 1:信息工程大学

摘要(Abstract)：

针对大型天线变形测量自动化程度低的问题,该文提出了基于emScon二次开发应用程序控制激光跟踪仪,对天线面板进行高精度点位测量的方法。设计了天线面板固定点位自动化测量总体方案及激光跟踪仪联机控制系统,阐述了激光跟踪仪精确照准目标反射镜的机制,并通过模拟实验对提出的方法进行了验证。结果表明,该方法可满足自动化测量的要求,解决了大型天线因自身和外界环境因素而难以捕捉其微小变化的难题,为设备的正常运行提供可靠的数据支撑。

关键词(KeyWords)： 变形测量;emScon软件;激光跟踪仪;自动化

Abstract:

Keywords:

基金项目(Foundation):

作者(Authors): 王罗刚;王同合;范百兴;程志强;崔瑞兵;

DOI: 10.16251/j.cnki.1009-2307.2017.02.025

参考文献(References)：

• [1]李宗春,李广云,吴晓平.天线反射面精度测量技术述评[J].测绘通报,2003(6):16-19.(LI Zongchun,LI Guangyun,WU Xiaoping.Review of accuracy measuring technology of antenna's surface[J].Bulletin of Surveying and Mapping,2003(6):16-19.)
• [2]王保丰,李广云,李宗春,等.高精度数字摄影测量技术在50m大型天线中的应用[J].测绘工程,2007,16(1):42-46.(WANG Baofeng,LI Guangyun,LI Zongchun,et al.Application of high accuracy digital photogrammetry technology in a 50-meter large antenna[J].Engineering of Surveying and Mapping,2007,16(1):42-46.)
• [3]李广云.工业测量系统最新进展及应用[J].测绘工程,2001,10(2):36-40.(LI Guangyun.The state of the art and applications of the industrial measuring systems[J].Engineering of Surveying and Mapping,2001,10(2):36-40.)
• [4]李广云,李宗春.工业测量系统原理与应用[M].北京:测绘出版社,2012.(LI Guangyun,LI Zongchun.The principles and application of industrial measuring systems[M].Beijing:Surveying and Mapping Press,2012.)
• [5]李广云.非正交系坐标测量系统原理及进展[J].测绘信息与工程,2003,28(1):4-10.(LI Guangyun.Principle and developing trend of non-orthogonal coordinate systems[J].Journal of Geomatics,2003,28(1):4-10.)
• [6]季红侠.飞机大部件对接中的自动测量技术研究与系统开发[D].南京:南京航空航天大学,2012.(JI Hongxia.Research on the technology of automatic measurement in large aircraft component butt and system development[D].Nanjing:Nanjing University of Aeronautics and Astronautics,2012.)
• [7]胡宝海.基于EMSCON的多激光跟踪仪协同测量关键技术研究[D].杭州:浙江大学,2012.(HU Baohai.EMSCON-based collaborative measurement technologies of multi-laser tracker[D].Hangzhou:Zhejiang University,2012.)
• [8]张靓.物体空间动态方位工业测量方法研究[D].上海:上海大学,2008.(ZHANG Jing.Research on dynamic position industrial measurement method[D].Shanghai:Shanghai University,2008.)
• [9]Leica.emScon 3.5Programmers Manual,Tracker Programming Interface[Z].2009.