A.H.Dodson ,P.Fleming ,文湘北

摘要(Abstract)：

<正> 前言有关光电测距仪常规检定的必要性和方法,已有充分记载(如参考文献[2,11,12])。但因新仪器潜在精度的提高,所以重要的是保证检定方法自身不降低观测结果的精度,从而保证检测的可用性。本文在给出Geomensor CR204精密测距仪的各种基线检定结果之前,一般性地讨论了这个问

关键词(KeyWords)：

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): A.H.Dodson ,P.Fleming ,文湘北

参考文献(References)：

• [1] Angus-Leppan,P.V.,1980． Effects of temperature on precise distance measurement.Proceedings of the IAG symposium on Geodetic Length Measurement,Helsinki.
• [2] Ashkenazi,V.and Dodson,A.H,1977． The Nottingham multi-pillar base line.ASCE Journal,2,2．
• [3] Bomford,G.,1980． Geodesy.Clarendon Press,Oxford.
• [4] Com-Rad Ltd,Geomensor Operating Manual.
• [5] Deeth,C.P.,Dodson,A.H.and Ashkenazi,V.,1979． EDM accuracy and calibration.EDM Symposium,the polytechnic of the South Bank.
• [6] Dodson,A.H.and Zaher.M.1985． Refraction effects on vertical angle measurements.Survey Review,ⅩⅩⅤⅢ(217) .
• [7] Froome,K.D.,1971． Mekometer Ⅲ:EDM with sub-millimetre reso lution.Survey Review,ⅩⅩⅠ(161) .
• [8] Humphries,J.G.,(undated).Correction of Distance for the Effects of Refractive Index of the Atmosphere in the CR.204 Geomensor.Com-Rad Ltd publication,Slough.
• [9] Laurila,S.H.,1983． Electronic Surveying in Practise.Wiley,New York.
• [10] Rueger,J.M.,1976． Remarks on the joint determination of zero error and cyclic error for EDM instrument calibration.The Australian Surveyor,28,2．
• [11] Rueger,J.M.,1977． Design and use of base lines for the calibration of EDM instruments.20th Australian Survey Congress.Darwin.
• [12] Schwendener,H.R.,1972． Electronic distancers for short ranges:accuracy and checking procedures.Survey Review.ⅩⅩⅠ(164) .
• [13] Witte,B.and Schwarz,W.,1981． General remarks on electro-optical rangefinder calibration and experience gained in calibrating K & E-Autoranger-A.Proceedings of the FIG XVIth International Congress,Montreux.